Setup
Setting Up DivingStation
Since ContactGlove data is transmitted to Warudo via DivingStation, you must first complete the DivingStation setup. You can also route the data through Virtual Motion Capture (VMC).
Refer to the ContactGlove1 setup or ContactGlove2 setup
to complete the setup.
Updating the ContactGlove1 Firmware
To use this feature, firmware version 1.3 or later must be installed.
Open ContactGlove1 in DivingStation and check Version for each device in the Devices tab.
For firmware update instructions, please refer to
this guide.
Downloading Warudo
Download and launch Warudo
from the Steam product page by clicking "Play".